主要研究航空发动机等重大装备关键结构材料在高温等复杂环境下的疲劳、蠕变响应及失效机理。在显微实验平台研制、材料微观变形表征、材料服役性能评价等方面开展一系列的工作。迄今，共发表International Journal of Fatigue, Engineering Fracture Mechanics等高水平期刊文章十余篇，授权专利1项。目前担任《失效与分析》，《材料工程》，《航空材料学报》青年编委。

2015.09-2021.01  清华大学          固体力学系         工学博士

2011.09-2015.07  四川大学          工程力学系         工学学士

2024.02-至今       重庆大学航空航天学院        预聘副教授

2021.12-2024.01    中国科学院力学研究所        博士后/特别研究助理

2021.02-2021.10    中兴通讯股份有限公司        工程师

  研究方向

1. 原位实验力学

2. 高温疲劳与断裂

3. 航空航天结构材料力学性能评估

  科研项目

1.     国家自然基金青年基金项目，镍基单晶合金原位高温微动疲劳实验技术及力学性能研究，2023/01-2024/12，主持。

2.     中央高校基本科研业务费，镍基单晶合金厚度依赖的蠕变机理及性能预测，2024/06-2025/06，主持。

3.     国家重点研发计划“政府间国际科技创新合作”重点专项, 极端环境下先进轴承渗碳和密封工艺研究，2023/01-2025/12，骨干参与。

4.     国家自然科学基金重点项目，扫描显微环境下高温变形原位测量关键技术及其应用研究，2017/01-2021/12，骨干参与。

5.     国家自然科学基金面上项目，超长碳纳米管及其复合结构力学性能的实验研究，2019/01-2022.12，参与。

  最新出版物

[1] Zhigang Li, Chong Zhao, Jindong An Yue Zhang, Huiji Shi Zhen Wang#, Wei Xu#, Xide Li#, Effect of thickness and a cylindrical hole on  tensile behavior of Nickel-based single crystal superalloy with different secondary crystal orientation. Materials Science and Engineering: A, 2024 (Under review)

[2] Zhifu Zhao, Zhen Wang, Yehui Bie, Xiaoming Liu, Yueguang Wei. The Effect of Impact Load on the Atomistic Scale Fracture Behavior of Nanocrystalline bcc Iron. Nanomaterials, (14),2024,370

[3] Zhen Wang, Xingzhi Huang, Xuan Ye, Chong Zhao, Jianqiao Hu, Zhigang Li,Xiaoming Liu, Xide Li. Can electric heating replace contact heating in high-temperature test for nickel base single crystal superalloy? Journal of Alloys and Compounds, (945) 2023, 169321

[4] Sinan Zhang, Zhen Wang#, Jie Wang, Guihua Duan, Haixia Li. Study on the Influence of Defects on Fracture Mechanical Behavior of Cu/SAC305/Cu Solder Joint. Materials, (15)2022, 4756

[5] Zhen Wang. Chong Zhao, Jie Wang, Wenwang Wu, Xide Li. In-situ dwell-fatigue fracture experiment and CPFE simulation of SLM AlSi10Mg alloy at high temperature. International Journal of Frature, (235) 2022, 159–178

[6] Zhen Wang, Wenwang Wu, Jiecun liang, Xide Li. Creep–fatigue interaction behavior of nickel-based single crystal superalloy at high temperature by in-situ SEM observation. International Journal of Fatigue,(141)2020,105879

[7] Zhen Wang, Wenwang Wu, Guian Qian, Lijuan Sun, Xide Li, José A.F.O. Correia. In-Situ SEM investigation on fatigue behaviors of additive manufactured Al-Si10-Mg alloy at elevated temperature, Engineering Fracture Mechanics, 214 (2019), 149–163

[8] Hongfu Xie, Jiecun Liang, Zhen Wang, M. Liao, Xide Li. Scanning imaging restoration of moving or dynamically deforming objects. IEEE Transactions on Image Processing, (29)2020, 7290-7305

[9] Jiecun Liang, Zhen Wang, Xide Li. In situ scanning electron microscopy analysis of effect of temperature on small fatigue crack growth behavior of nickel-based single-crystal superalloy. International Journal of Fatigue, (128) 2019, 105195

[10] Jiecun Liang, Zhen Wang, Hongfu Xie, Xide Li. In situ scanning electron microscopy-based high-temperature deformation measurement of nickel-based single crystal superalloy up to 800℃. Optics and Lasers in Engineering, (108)2018, 1-14

[11] Zhen Wang, Jiecun Liang, Xide Li. In-situ SEM deformation testing of Ni-based superalloy heated by the joule heat. Proceedings, (2018), 507-511. ICEM18, Brussels, Belgium

[12] Zhen Wang, Xide Li, Xiaoming Liu. Study on small fatigue crack growth rate of SLM AlSi10Mg alloy. Journal of Physics: Conference Series, 2023, MSEE2022, Wuhan, China

[13] 李喜德，谢鸿福，王振，梁杰存，扫描成像模式下的动态图像重建方法及装置，申请号：

CN201810458217.5，申请日期：2018-5-4