男，博士，高级实验师。于2014年7月在北京航空航天大学航空科学与工程学院固体力学专业获得博士学位；2014年7月—2016年8月，在北京航空航天大学航空科学与工程学院航空宇航科学与技术博士后流动站开展博士后研究工作；2016年9月—现在，在重庆大学航空航天学院从事实验技术开发与教学工作。        
  参与国家自然科学基金6项， 承担航空、航天等单位横向课题20余项。在国内外著名期刊发表论文30余篇，其中SCI、EI（如国际A类期刊《International Journal of Fatigue》、《Materials Science & Engineering A》等）收录20篇；获授权国家发明专利5项。主持编写《ANSYS 17.0有限元分析从入门到精通》、《MATLAB R2016a完全自学一本通》、《MATLAB R2022a完全自学一本通》等著作。

2009/09-2014/07，北京航空航天大学，航空科学与工程学院，博士        
2004/09-2007/07，北京化工大学，机电工程学院，硕士        
1998/09-2002/07，太原科技大学，应用科学学院，本科

2016/09-至今，重庆大学，航空航天学院，高级实验师        
2014/07-2016/08，北京航空航天大学，航空科学与工程学院，博士后，合作导师：杨超        
2007/07-2009/09，太原科技大学，力学系，讲师        
2002/07-2004/09，太原科技大学，力学系，助教

金属/非金属材料复杂环境下疲劳及断裂力学行为；煤矿瓦斯灾害防治；材料及结构损伤容限行为。

论文：        
(1)  Peng K, Shi S, Liu H*, et al. Disaster-causing mechanisms of gas migration under loading and unloading conditions[J].Environmental Earth Sciences,2024,83(16):468-468.

(2) Jiang, ZB , Gao, SK, Hao Liu*, Chen, SL, et al. Effect of liquid CO2 phase change on pores and fractures in coal: An experimental study[J].Environmental Earth Sciences,2024,17.

(3) Wang C, Yao J, Zhang X, Wu Y, Liu X, Liu H, et al. Fatigue Life Data Fusion Method of Different Stress Ratios Based on Strain Energy Density.[J].Materials (Basel, Switzerland),2024,17(12):2982-2982.

(4) Zhang X, Yao J, Wu Y, Liu X, Wang C, Liu H. A Method for Predicting the Creep Rupture Life of Small-Sample Materials Based on Parametric Models and Machine Learning Models[J].Materials,2023,16(20):6804-.

(5) 邹全乐,周小莉,王睿智,刘浩,刘莹.不同分级循环加卸载模式下六边形蜂窝能量演化规律[J].重庆大学学报,2023,46(08):45-55.

(6) 刘天奇,张广鑫,张田,刘浩,亓新新,时新红.硬质金属材料多轴高周疲劳寿命快速预测方法[J].重庆大学学报,2023,46(03):94-102.

(7) 杨军斌,罗振坤,刘浩,张雷,康笃刚.起重机用Q355钢母材与焊接接头试件拉压扭转疲劳性能研究[J].起重运输机械,2023,(03):71-76.

(8) 龚愉,邹罗欢,姚建尧,赵友选,刘浩. 基于在线课程建设的翻转课堂实践——以复合材料力学课程为例[J].西南交通大学学报:社会科学版, 2023, 24(S01):108-111.(9) Peng K, Zhang J, Liu H*, et al. Mechanical properties of thermally treated granite subjected to different multi-stage unloading paths[J].Environmental Earth Sciences,2023,82(1):

(10) Wang Y, Wang Y, Luo S, Liu H*, et al. Influence of the Crack Angle on the Deformation and Failure Characteristics of Sandstone under Stepped Cyclic Uniaxial Compression with a Constant Lower Limit[J].Mathematics,2023,11(9):

(11) Qican R, Yunpei L, Quanle Z, Hao L, et al. Experimental investigation on mechanical characteristics of red sandstone under graded cyclic loading and its inspirations for stability of overlying strata[J].Geomechanics and Geophysics for Geo-Energy and Geo-Resources,2023,9(1):

(12) Xiaoyan S, Qican R , Hao L*, et al.Characteristics of Stress-Displacement-Fracture Multi-Field Evolution around Gas Extraction Borehole[J].Energies,2023,16(6):2896-2896.

(13) Hongyan Q, Jingui Z, Zhiheng C, Hao L*, et al. Research on Overburden Failure Characteristics Based on the Theory of Plates and Shells[J].Sustainability,2022,14(18):11441-11441.

(14) Jiang, ZB, Quan, XP, Tian, SX, LH*, Guo, YL, Fu, XX, Yang, XF. Permeability-Enhancing Technology through Liquid CO2 Fracturing and Its Application[J].Sustainability,2022,14.

(15) Zhengjie S, Zhaofeng W, Zhiheng C, Hao L, et al.Permeability Enhancement Technology for Soft and Low-Permeability Coal Seams Combined with Hydraulic Perforation and Hydraulic Fracturing[J].Geofluids,2022,2022

(16) Junbin Y, Yu G, Linfei J, Wangjia L, Hao L. A multi-axial and high-cycle fatigue life prediction model based on critical plane criterion[J].Journal of Materials Research and Technology,2022,184549-4563.

(17) Tie L ,Dong W ,Hua M L , Hao L ,et al.Laboratory Study on Changes in Gas Desorption Properties of Anthracite after Cyclic Loading[J].Advances in Civil Engineering,2021,2021

(18) Linfei J ,Yongxiang Z ,Yu G , Wangchang Li ,Sue Ren ,Hao L. A new model characterizing the fatigue delamination growth in DCB laminates with combined effects of fiber bridging and stress ratio[J].Composite Structures,2021,268

(19) Yongxiang Z ,Linfei J ,Yu G ,Hao L ,et al.Failure prediction of marine non-planar composite π joints based on combined 2D material model and progressive damage method[J].Ocean Engineering,2021,222

(20) Zhang Y ,Huang K ,Liu H , et al.A concise and novel binomial model for creep-fatigue crack growth behaviors[J].International Journal of Fatigue,2020,135105557-105557.

(21)Gong Y ,Li W ,Liu H , et al.A novel understanding of the normalized fatigue delamination model for composite multidirectional laminates[J].Composite Structures,2019,229111395-111395.

(22) Hao Liu, Ruisen Yin, Quanle Zou, Jianping Zhang, Zhanfang Liu, Xiyan Zhang. Effects of micro-twin lamellar structure on the mechanical properties and fracture morphology of AZ31 Mg alloy. Materials Science & Engineering A, 2019, 745:221-230.        

(23) Meng Zhang, Yongxiang Zhang, Hao Liu*, Quanle Zou. Judgment criterion of the dominant factor of creep-fatigue crack growth in anickel-based superalloy at elevated temperature. International Journal of Fatigue, 2019,118:176-184.        
(24) YaoWu Xu, Rui Bao*, Hao Liu, Xiang Zhang. A modified loading method for separating the effect of residual stress on fatigue crack growth rate of welded joints. Fatigue & Fracture of Engineering Materials & Structures, 2017, 40:1227-1239.        
(25) Rui Bao, Hao Liu*, Songsong Lu, Chenyang Yue, Binjun Fei. Experimental investigation of creep crack growth behavior in nickel base superally by constant displacement loading method at elevated temperature. Materials Science & Engineering A, 2016, 665:161-170.        
(26) Hao Liu, Rui Bao*, Jianyu Zhang, Binjun Fei. A creep-fatigue crack growth model containing temperature and interactive effects. International Journal of Fatigue, 2014,59:34-42.        
(27) Hao Liu, Rui Bao*, Weiming Lei, Binjun Fei. Evaluating the critical temperature of creep-fatigue interaction a nickel-based powder metallurgy superalloy. Key Engineering Materials, 2014, 577-578:625-628.        
(28) Hao Liu, Rui Bao*, Binjun Fei. Determination of creep crack growth threshold by experiments under elevated temperature with pre-stressed specimens. Advanced Materials Research, 2014,891-892:371-376.        
(29) 刘浩, 鲍蕊*, 岳晨阳, 费斌军. 应力强度因子变程相关的FGH97蠕变-疲劳裂纹扩展主导因素. 航空动力学报, 2016, (31):1400-1407.        
(30) 刘浩, 曾伟, 丁桦*, 赵军. 利用红外热像技术快速确定材料疲劳极限.力学与实践,2007,29,(4):36-39        
(31) 刘浩, 赵军*,丁桦. 疲劳过程中生热机理的实验探讨. 实验力学, 2008,23(1):1-8        
专著：        
[1] 刘浩，韩晶. MATLAB R2016a 完全自学一本通. 北京:电子工业出版社,2016.10        
[2] 刘浩．ANSYS 17.0有限元分析从入门到精通. 北京,机械工业出版社,2016.11    

[3] 刘浩，韩晶. MATLAB R2022a 完全自学一本通. 北京:电子工业出版社,2022.12      
专利：        
[1] 刘浩,刘涵,邹全乐,等 .   一种复杂地质构造下煤岩三维应变场可视化系统及方法.  专利号：202010546108.6

[2] 刘浩,张永祥,王睿智,等. 一种三维应力波传播监测装置及方法.  专利号：202111294743.0

[3] 丁桦，刘浩，曾伟．用红外热像进行疲劳分析和检测的方法．专利号：200610080490.6，        
[4] 鲍蕊，刘浩，张建宇．一种测量材料高温蠕变裂纹扩展门槛值的方法．专利号：201310116477，        
[5] 鲍蕊，刘浩，张建宇．一种测量材料高温蠕变裂纹扩展临界温度的方法．专利号：201310116462，

研究生课程：《电测技术》        
本科生课程：《材料力学实验》、《理论力学实验》、《工程力学实验》、《航空结构综合实践》

协助指导研究生4名，已毕业1名。

Tel: 023-65102524